The SK-ACP Advanced Control Panel is a highly sophisticated, yet simple to use, two door access control unit. The unit accepts readers that have a Wiegand output with almost any card technology, including Proximity, Touch Card, Wiegand, Magnetic Stripe, Bar Code, Optical, and Biometric. Each of the two doors controlled by the unit is completely independent of the other and is configured, programmed and viewed separately. Each has a separate node address.

As a stand alone, the unit may be programmed using a PC either locally or via a modem over standard phone lines. Transaction information is stored by the unit and may be downloaded to a PC or printer.                     

• Supports Two Wiegand Output Card Readers
• 65,000 Card Capacity
• 4,800 Date and Time Stamped Stored Events
• 15 Programmable Time Zones with Weekly Schedule Plus Holidays
• 32 Programmable Holidays
• Over 100 panels can be linked to a PC with SK-NETTM software using a simple RS-485 bus
• Modem Capability for Remote Locations*
• TCP/IP Capability for LAN Connection*

      * Requires additional equipment


       Connection Diagram

PHYSICAL		SK-ACP-LE	SK-ACP-SE	SK-ACP-NE (ALSO AVAILABLE)
	Depth	3.00" (7.62 cm)	2.5" (6.35 cm)	1.0" (2.54 cm)
	Width	10.0" (25.40 cm)	8.0" (20.32 cm)	4.8" (12.19 cm)
	Height	11.0" (27.94 cm)	8.0" (20.32 cm)	4.6" (11.68 cm)
	Weight	68.8 oz (1.95 kg)	36 oz. (1.02 kg)	N/A
	Material	All Steel	All Steel	N/A
	Color	Beige	Beige	N/A

POWER REQUIREMENTS
	16.5-24 VAC, 20 VA or 16-30 VDC, 100 mA plus reader current draw
	* A 12 VDC Power Supply may be used if connected to Battery Back-UP Leads. 100mA, plus 150 mA max. reader current draw per reader (Power Supply not included).

BACK-UP BATTERY   12 V, 1.2 - 6 Ah (Optional, not included)

SOFTWARE       SK-NETTM Software Version 2.0 or greater

CARD READERS     Connect two card readers with two-line Wiegand output, up to 40 bits. Provides 14 VDC, 150 mA max. power for each card reader.

OUTPUTS 2 Per Door (Total of 4) Latch & Alarm Shunt DPDT contact, 2A, up to 220 VAC or 30 VDC   Auxiliary DPDT contact, 2A, up to 220 VAC or 30 VDC

INPUTS 2 Per Door (Total of 4) Auxiliary 1 Requires SPST contact closure   Auxiliary 2 Requires SPST contact closure

COMMUNICATION   RS-232 5-Wire Shielded Cable, up to 38.4K baud, full duplex, (8N1) - UP TO 100'   RS-485 Single Twisted Pair, shielded cable with a signal ground- UP TO 4000'   Wiegand Input (2) Programmable up to 40 bits14 VDC @ 150 mA supplied to each reader,   Modem Requires Hayes compatible - 1.2 to 38.4k baud   LAN Requires external device server   Printer Serial Printer (or Parallel printer with serial converter)

ENVIRONMENT Access Control Unit and Card/Key Tag   Ambient Temperature -40° to +70°C (-40° to +158°F)   Humidity 0% to 95% Relative Humidity (non-condensing)

OPERATIONAL Per Door  < Card Capacity 65,535 /Door (Highest card number = 65,535) Time Zones 15 for card access, one door unlock; full week plus holiday in one-half hour segments; 32 programmable holidays; selectable automatic daylight saving time. Facility Code Up to 16 different codes simultaneously Latch/Alarm Shunt Timer Programmable from 1/4 to 30 seconds Antipassback Real or Timed (1 to 30 minutes); hard or soft Auxiliary Inputs (2) Programmable for door monitor, tamper monitor, remote Auxiliary Output (1) Output is programmable to activate under one of many   Limited Use Cards 4,000 (in a block within 65,535) programmable from 1-500   Transaction Storage 4,864 events   Memory Non-volatile

This product complies with UL 294 Standards, CE (European Standards), and with Part 15 of the Class B FCC Rules.